top of page

Featuring a 6-1/2” woofer with a polypropylene cone and rubber surround, a 1” fabric dome tweeter and inline crossovers, the G60S is designed to make installation easy and to provide the market leading performance you’ve come to expect from Audiofrog.


The woofer’s steel basket is shallow enough to fit nearly every factory-provided 6” location and the tweeter mounting kit can be completely dismantled so the tweeter can be easily installed in factory tweeter locations. No factory location for the tweeter? No problem. The G60S includes innovative flush mount kits that make adding a tweeter in the right location simple.


Inline crossovers make running wires in and out of door grommets a thing of the past. The small tweeter crossover can be mounted close to the tweeter and the crossover for the woofer can be mounted near the woofer. That’s a big time saver when woofers will be mounted in the doors and the tweeters in the dashboard or in the A-pillar.

  • Rigid and shallow steel woofer basket
  • Parabolic polypropylene woofer cone
  • Nitrile butadiene rubber surround
  • 1” (25mm) copper voice coil on Kapton® former
  • Flat progressive Nomex® spider
  • Ferrite magnet
  • 1” (25mm) fabric dome neodymium tweeters
  • Tweeters include reflection absorbing and diffusing foam pad
  • Convenient and innovative tweeter flush mounting kit
  • In-line crossovers with speaker connectors already installed
  • 12dB/octave tweeter high pass filter with protection circuit
  • 6dB/octave woofer low pass filter
  • Multiadapter included for factory fitment in many cars

AudioFrog G60S 6.5" Premium Grade Automotive Full Range Speaker

  • • Nominal Impedance: 4Ω
    • RMS Power Handling: 50 W (with crossover)
    • Peak Power Handling: 120 W (with crossover)
    • Frequency Response:50 Hz – 20 kHz
    • Sensitivity (2.83 V/1 M): 89 dB
    • Recommended Amplifier RMS Power Range: 15 W – 75 W

  • • Cut-out Diameter (woofer): 132.5 mm (5-7/32”)
    • Overall Diameter (woofer): 158.2 mm (6-15/64″)
    • Overall Diameter Including Mounting Tabs (woofer): 166 mm (6-17/32″)
    • Mounting Depth (woofer): 51.2 mm (2-1/64″)
    • Mounting Height (woofer): 12 mm (15/32″)
    • Cut-out Diamater (tweeter flush mount): 48 mm (1-57/64”)
    • Overall Diameter (tweeter flush mount): 54 mm (2-1/8”)
    • Mounting Depth (tweeter flush mount): 13 mm (33/64”)

bottom of page